Skip to content

Sustainability ReferenceEmission factors

Location-based vs market-based Scope 2: which factor goes where

Updated 2026-10-11

Scope 2 covers emissions from electricity, heat, steam and cooling that a company buys. Corporate reporting frameworks built on the GHG Protocol commonly ask for Scope 2 to be reported in two ways side by side: location-based and market-based. They answer different questions, so they need different kinds of factors.

Location-based: what the grid emits where you are

The location-based number reflects the average emissions of the grid your sites draw from. You multiply the electricity you used by a grid-average factor for the country or sub-national grid region and the year.

Grid factors differ a lot between countries. In the Ember data imported on this site, electricity generated in Sweden in 2025 had an intensity of 0.03526 kg CO2e per kWh, while Poland’s was 0.5886 kg CO2e per kWh. The same 10,000 kWh therefore comes to about 352.6 kg CO2e in Sweden and 5,886 kg CO2e in Poland with these factors.

Things to check before you use a grid factor:

Market-based: what you contracted for

The market-based number reflects the electricity a company has chosen through contracts and certificates, such as supplier-specific tariffs, energy attribute certificates or power purchase agreements. The factor comes from those instruments or from your supplier, not from a grid average. Where a company has no such instruments, a “residual mix” factor is commonly used: the grid mix after certified renewable electricity sold to others has been taken out.

This site does not currently hold supplier-specific or residual-mix factors. Our search only lists factors whose dataset supports them, and we show the scope label exactly as each dataset assigns it.

Practical steps

  1. Collect electricity use per site and per year, in kWh or MWh.
  2. For the location-based figure, pick one grid dataset and use it consistently for all sites. Do not mix datasets between sites unless you explain why.
  3. For the market-based figure, collect supplier disclosures and certificate records; fall back to a residual-mix factor only where you have none.
  4. Record the dataset, edition and year of every factor. Every factor page has a ready-made citation for that, and the country pages list every year.

Limitations of this guide

This guide describes the two methods in general terms. It was written without access to the text of the GHG Protocol Scope 2 Guidance; check the current guidance and your reporting framework before you rely on any specific rule.

Sources