Skip to content

Sustainability ReferenceFreight emissions

Well-to-wheel vs tank-to-wheel freight emission factors

Published 2026-10-11

Every freight factor in this calculator is labelled WTW (well-to-wheel) or TTW (tank-to-wheel). The label tells you which emissions the number covers, and the two are not interchangeable.

Tank-to-wheel (TTW)

TTW covers the emissions released while the vehicle, train, ship or aircraft is operating: what comes out of the exhaust or the funnel when the fuel is burned. For an electric vehicle or train, TTW emissions at the vehicle are zero, because the emissions happen at the power plant.

Well-to-tank (WTT) and well-to-wheel (WTW)

Fuel and electricity have their own footprint before they reach the vehicle: extraction, refining, transport of the fuel, or generation and transmission of electricity. That upstream part is called well-to-tank (WTT). WTW = WTT + TTW: the full energy chain.

A WTW factor is therefore always at least as large as the TTW factor for the same vehicle and load, and the gap is largest where the energy supply chain is emission-intensive — and for electric transport, where TTW is zero and almost everything is upstream.

Which one should you use?

How the calculator handles it

Checklist

  1. Read the basis next to each factor in the results.
  2. Keep one basis per report.
  3. When you take a carrier’s number, ask which basis it is on before you enter it as your own factor.

Sources