Methodology
Formula
For each leg of a shipment: emissions (kg CO2e) = weight (t) × distance (km) × emission factor (kg CO2e per tonne-km). Weight × distance is the transport activity in tonne-kilometres. The shipment total is the sum of its legs. Legs on different bases (well-to-wheel and tank-to-wheel) are totalled separately, never added together.
Emission factors
Factors come from a shared, versioned export of our sister factor database (contract version 1, export of 2026-10-11). Only datasets whose licence allows republication are used; each factor shows its dataset, edition, licence, vehicle or vessel class, load assumption and basis. Factors from different datasets are never averaged.
Current status: 254 factors from UK Government GHG Conversion Factors for Company Reporting, 2026 (flat file v1.2, updated July 2026) (Open Government Licence v3.0). None of them covers inland waterway; legs by that mode need your own factor.
Air: DESNZ sets its air freight factors for international flights between non-UK countries equal to its UK long-haul air freight factors; the domestic and short-haul classes refer to flights within the UK and between the UK and Europe or North Africa. The DESNZ air factors cover direct CO2, CH4 and N2O only. The "With RF" classes apply DESNZ's recommended central multiplier of 1.7 to the CO2 part for aviation's other climate effects (such as contrails, water vapour and NOx), a value DESNZ says is subject to significant uncertainty; the default air class here is "Without RF". (DESNZ methodology paper)
Where a dataset distinguishes classes (for example truck size and load, vessel type), you can choose the class. A default class per mode — the broadest average row the dataset offers — is preselected and labelled.
Well-to-wheel and tank-to-wheel
Tank-to-wheel (TTW) covers emissions from operating the vehicle. Well-to-wheel (WTW) adds the emissions of producing and delivering the fuel or electricity (well-to-tank). Where a dataset publishes both a direct factor and a well-to-tank factor for the same row, WTW is their sum within that dataset and edition.
Distances
- Entered: the distance you type, labelled "entered".
- Great-circle: the shortest path over a spherical Earth (radius 6371.0088 km) between two places, using public-domain city coordinates (Natural Earth 1:10m populated places (ne_10m_populated_places_simple)). Real routes are longer, so these legs are labelled and flagged as likely underestimates.
- Great-circle + detour: used only when a sourced detour factor exists for the mode. Current status: no detour factor is applied, because none could be verified from an openly licensed source for road, rail or inland waterway; for air see the next point, for sea the point after it.
- Air: The UK Government (DESNZ) conversion factors already include an 8% uplift on great-circle flight distance for indirect flight paths, delays and circling, and DESNZ recommends using great-circle distance with them. So air legs use great-circle distance and no detour is added on top (DESNZ methodology paper, paragraphs 8.37–8.38). A factor you enter yourself may not include such an uplift.
- Sea route: for the sea lanes on our route pages (19 of 22), the distance is the shortest route over the maritime network of Eurostat SeaRoute (EUPL-1.2 (European Union Public Licence v1.2)), computed with its released program: city coordinates are snapped to the nearest network node, and lanes where a city is more than 60 km from the network keep the great-circle distance. The calculator uses the same values when you pick one of those city pairs for a sea leg; other sea legs are great-circle and labelled as such. Real voyages can be longer (port approaches, weather routing, port calls).
- UN/LOCODE locations: prepared but not enabled yet; locations are cities.
Mode comparison
"Same distance by another mode" applies the other mode's default factor to the shipment's total distance. A real route by that mode would have a different length, so treat it as an indication.
Standards: ISO 14083 and the GLEC Framework
EU Regulation (EU) 2026/1030 of 29 April 2026 on the greenhouse gas emissions accounting of transport services (CountEmissionsEU) entered into force on 1 June 2026. It sets one EU methodology for freight and passenger transport emissions aligned with EN ISO 14083:2023, applies to EU companies that choose to disclose transport emissions, and is expected to apply in full by the end of 2030, after implementing and delegated acts. (European Commission, 1 June 2026)
ISO 14083 is the international standard for quantifying and reporting greenhouse-gas emissions of transport chains, and the GLEC Framework from Smart Freight Centre is the logistics industry's method guide for the same purpose. Both build emissions from transport activity (tonne-km) and emission intensity per leg, and both distinguish well-to-wheel from tank-to-wheel. This calculator follows that leg-by-leg structure, but it uses published average factors rather than carrier-specific data, and it does not include hub emissions, so its results are not a full ISO 14083 or GLEC-conformant report.
The current edition referenced by the EU is EN ISO 14083:2023. We could not read the GLEC Framework's own pages (they need a browser), so we state no GLEC edition or date. Official pages: ISO 14083 at iso.org and Smart Freight Centre (GLEC Framework).
Limitations
- Average factors per class: real vehicles, loads, empty running and energy sources differ.
- Great-circle distances understate real road, rail and sea routes; no openly licensed detour factor for road or rail could be verified.
- No hub, warehouse or handling emissions (no sourced factor available).
- Refrigerated transport, dangerous goods and special equipment are only covered where the dataset has a class for them.
Questions
- What formula does the calculator use?
- For each leg: emissions (kg CO2e) = weight (tonnes) × distance (km) × factor (kg CO2e per tonne-km). The shipment total is the sum of its legs on the same basis.
- Is this a verified carrier emissions statement?
- No. It is an estimate for planning and indicative reporting, based on published average factors or factors you enter yourself.
- Are hub and handling emissions included?
- No. They are only included where a sourced factor exists, and none is in the current data.